dccp
dccp — Copy a file from or to a dCache server.
Arguments
The following arguments are required:
sourceUrl
The URL of the source file.
destUrl
The URL of the destination file.
Description
The dccp utility provides a cp(1)
like functionality on the dCache file system. The source
must be a single file while the destination could be a
directory name or a file name. If the directory is a
destination, a new file with the same name as the source name
will be created there and the contents of the source will be
copied. If the final destination file exists in dCache, it
won’t be overwritten and an error code will be returned. Files
in regular file systems will always be overwritten if the
-i
option is not specified. If the source and
the final destination file are located on a regular file
system, the dccp utility can be used similar to the
cp(1) program.
Options
The following arguments are optional:
-a
Enable read-ahead functionality.
-b
<bufferSize>Set read-ahead buffer size. The default value is
1048570
Bytes. To disable the buffer this can be set to any value below the default. dccp will attempt to allocate the buffer size so very large values should be used with care.-B
<bufferSize>Set buffer size. The size of the buffer is requested in each request, larger buffers will be needed to saturate higher bandwidth connections. The optimum value is network dependent. Too large a value will lead to excessive memory usage, too small a value will lead to excessive network communication.
-d
<debug level>Set the debug level. <debug level> is a integer between
0
and127
. If the value is0
then no output is generated, otherwise the value is formed by adding together one or more of the following values:Value Enabled output 1 Error messages 2 Info messages 4 Timing information 8 Trace information 16 Show stack-trace 32 IO operations 32 IO operations 64 Thread information -h
<replyHostName>Bind the callback connection to the specific hostname interface.
-i
Secure mode. Do not overwrite the existing files.
-l
<location>Set location for pre-stage. if the location is not specified, the local host of the door will be used. This option must be used with the -P option.
-p
<first_port>:<last_port>Bind the callback data connection to the specified
TCP
port/rangeSet port range. Delimited by the ’:’ character, the <first_port> is required but the <last_port> is optional.-P
Pre-stage. Do not copy the file to a local host but make sure the file is on disk on the dCache server.
-r
<bufferSize>TCP
receive buffer size. The default is256K
. Setting to0
uses the system default value. Memory useage will increase with higher values, but performance better.-s
<bufferSize>TCP
send buffer size. The default is256K
. Setting to0
uses the system default value.-t
<time>Stage timeout in seconds. This option must be used with the
-P
option.
Examples:
To copy a file to dCache:
[user] $
dccp /etc/group dcap://example.org/pnfs/desy.de/gading/
To copy a file from dCache:
[user] $
dccp dcap://example.org/pnfs/desy.de/gading/group /tmp/
Pre-Stage request:
[user] $
dccp -P -t 3600 -l example.org /acs/user_space/data_file
stdin:
[user] $
tar cf - data_dir | dccp - /acs/user_space/data_arch.tar
stdout:
[user] $
dccp /acs/user_space/data_arch.tar - | tar xf -