This section briefly describes the commands and mechanisms to
monitor the TSS PUT, GET and REMOVE operations. dCache
provides a configurable logging facility and a Command Line
Admin Interface to query and manipulate transfer and waiting
queues.
By default dCache is configured to only log information if something unexpected happens. However, to get familiar with Tertiary Storage System interactions you might be interested in more details. This section provides advice on how to obtain this kind of information.
Since you provide the executable, interfacing dCache and
the TSS, it is in your responsibility to ensure sufficient
logging information to be able to trace possible problems
with either dCache or the TSS. Each request should be
printed with the full set of parameters it receives,
together with a timestamp. Furthermore information returned
to dCache should be reported.
In dCache, each domain (e.g. dCacheDomain,
<pool>Domain etc) prints logging information into its own
log file named after the domain. The location of those log
files it typically the /var/log or /var/log/dCache directory
depending on the individual configuration. In the default
logging setup only errors are reported. This behavior can be
changed by either modifying
/opt/d-cache/etc/logback.xml or using
the dCache CLI to increase the log level of particular
components as described below.
If you intend to increase the log level of all components on
a particular host you would need to change the
/opt/d-cache/etc/logback.xml file as
described below. dCache components need to be restarted to
activate the changes.
<threshold>
<appender>stdout</appender>
<logger>root</logger>
<level>warn</level>
</threshold>
needs to be changed to
<threshold>
<appender>stdout</appender>
<logger>root</logger>
<level>info</level>
</threshold>Important
The change might result in a significant increase in log messages. So don’t forget to change back before starting production operation. The next section describes how to change the log level in a running system.
Example:
Login into the dCache Command Line Admin Interface and
increase the log level of a particular service, for
instance for the poolmanager service:
[example.dcache.org](local) admin >cd PoolManager [example.dcache.org](PoolManager) admin >log set stdout ROOT INFO [example.dcache.org](PoolManager) admin >log ls stdout: ROOT=INFO dmg.cells.nucleus=WARN* logger.org.dcache.cells.messages=ERROR* .....
The dCache Command Line Admin Interface gives access to information describing the process of storing and fetching files to and from the TSS, as there are:
-
The Pool Manager Restore Queue. A
list of all requests which have been issued to all pools
for a
FETCH FILEoperation from the TSS (rc ls) -
The Pool Collector Queue. A list of
files, per pool and storage group, which will be scheduled
for a
STORE FILEoperation as soon as the configured trigger criteria match. -
The Pool
STORE FILEQueue. A list of files per pool, scheduled for theSTORE FILEoperation. A configurable amount of requests within this queue are active, which is equivalent to the number of concurrent store processes, the rest is inactive, waiting to become active. -
The Pool
FETCH FILEQueue. A list of files per pool, scheduled for theFETCH FILEoperation. A configurable amount of requests within this queue are active, which is equivalent to the number of concurrent fetch processes, the rest is inactive, waiting to become active.
For evaluation purposes, the pinboard of each component can be used to track down dCache behavior. The pinboard only keeps the most recent 200 lines of log information but reports not only errors but informational messages as well.
Example:
Check the pinboard of a service, here the poolmanager service.
[example.dcache.org](local) admin >cd PoolManager [example.dcache.org](PoolManager) admin >show pinboard 100 08.30.45 [Thread-7] [pool_1 PoolManagerPoolUp] sendPoolStatusRelay: ... 08.30.59 [writeHandler] [NFSv41-dcachetogo PoolMgrSelectWritePool ... ....
Example:
The PoolManager Restore Queue.
Remove the file test.root with the
pnfs-ID 00002A9282C2D7A147C68A327208173B81A6.
[example.dcache.org] (pool_1) admin > rep rm 00002A9282C2D7A147C68A327208173B81A6
Request the file test.root
[user] $ /opt/d-cache/dcap/bin/dccp dcap://example.dcache.org:/data/test.root test.root
Check the PoolManager Restore Queue:
[example.dcache.org](local) admin >cd PoolManager [example.dcache.org](PoolManager) admin >rc ls 0000AB1260F474554142BA976D0ADAF78C6C@0.0.0.0/0.0.0.0-*/* m=1 r=0 [pool_1] [Staging 08.15 17:52:16] {0,}
Example:
The Pool Collector Queue.
[example.dcache.org](local) admin >cd pool_1 [example.dcache.org](pool_1) admin >queue ls -l queue Name: chimera:alpha Class@Hsm: chimera:alpha@osm Expiration rest/defined: -39 / 0 seconds Pending rest/defined: 1 / 0 Size rest/defined: 877480 / 0 Active Store Procs. : 0 00001BC6D76570A74534969FD72220C31D5D [example.dcache.org](pool_1) admin >flush ls Class Active Error Last/min Requests Failed dteam:STATIC@osm 0 0 0 1 0
Example:
The pool STORE FILE Queue.
[example.dcache.org](local) admin >cd pool_1 [example.dcache.org](pool_1) admin >st ls 0000EC3A4BFCA8E14755AE4E3B5639B155F9 1 Fri Aug 12 15:35:58 CEST 2011
Example:
The pool FETCH FILE Queue.
[example.dcache.org](local) admin >cd pool_1 [example.dcache.org](pool_1) admin >rh ls 0000B56B7AFE71C14BDA9426BBF1384CA4B0 0 Fri Aug 12 15:38:33 CEST 2011
To check the repository on the pools run the command rep ls that is described in the beginning of the section called “How to Store-/Restore files via the Admin Interface”.