release notes | Book: 1.9.5, 1.9.12 (opt, FHS), 2.6 (FHS), 2.7 (FHS), 2.8 (FHS), 2.9 (FHS), 2.10 (FHS), 2.11 (FHS), | Wiki | Q&A black_bg
Web: Multi-page, Single page | PDF: A4-size, Letter-size | eBook: epub black_bg

Migration Module

The purpose of the migration module is essentially to copy or move the content of a pool to one or more other pools.

Typical use cases for the migration module include:

  • Vacating pools, that is, moving all files to other pools before decomissioning the pool.

  • Caching data on other pools, thus distributing the load and increasing availability.

  • As an alternative to the hopping manager.

[return to top]

Overview and Terminology

The migration module runs inside pools and hosts a number of migration jobs. Each job operates on a set of files on the pool on which it is executed and can copy or move those files to other pools. The migration module provides filters for defining the set of files on which a job operates.

The act of copying or moving a single file is called a migration task. A task selects a target pool and asks it to perform a pool to pool transfer from the source pool. The actual transfer is performed by the same component performing other pool to pool transfers. The migration module does not perform the transfer; it only orchestrates it.

The state of the target copy (the target state) as well as the source copy (the source state) can be explicitly defined. For instance, for vacating a pool the target state is set to be the same as the original source state, and the source state is changed to removed; for caching files, the target state is set to cached, and the source state is unmodified.

Sticky flags owned by the pin manager are never touched by a migration job, however the migration module can ask the pin manager to move the pin to the target pool. Care has been taken that unless the pin is moved by the pin manager, the source file is not deleted by a migration job, even if asked to do so. To illustrate this, assume a source file marked precious and with two sticky flags, one owned by foobar and the other by the pin manager. If a migration job is configured to delete the source file, but not to move the pin, the result will be that the file is marked cached, and the sticky flag owned by foobar is removed. The pin remains. Once it expires, the file is eligible for garbage collection.

All operations are idempotent. This means that a migration job can be safely rerun, and as long as everything else is unchanged, files will not be transferred again. Because jobs are idempotent they do not need to maintain persistent state, which in turns means the migration module becomes simpler and more robust. Should a pool crash during a migration job, the job can be rerun and the remaining files will be transfered.

Note

Please notice that a job is only idempotent as long as the set of target pools do not change. If pools go offline or are excluded as a result of a an exclude or include expression, then the idempotent nature of a job may be lost.

It is safe to run migration jobs while pools are in use. Once started, migration jobs run to completion and do only operate on those files that matched the selection filters at the time the migration job started. New files that arrive on the pool are not touched. Neither are files that change state after a migration job has been initialized, even though the selection filters would match the new state of the file. The exception to the rule is when files are deleted from the pool or change state so that they no longer match the selection filter. Such files will be excluded from the migration job, unless the file was already processed. Rerunning a migration job will force it to pick up any new files. Because the job is idempotent, any files copied before are not copied again.

Permanent migration jobs behave differently. Rather than running to completion, permanent jobs keep running until explicitly cancelled. They monitor the pool for any new files or state changes, and dynamically add or remove files from the transfer queue. Permanent jobs are made persistent when the save command is executed and will be recreated on pool restart. The main use case for permanent jobs is as an alternative to using a central hopping manager.

Idempotence is achieved by locating existing copies of a file on any of the target pools. If an existing copy is found, rather than creating a new copy, the state of the existing copy is updated to reflect the target state specified for the migration job. Care is taken to never make a file more volatile than it already is: Sticky flags are added, or existing sticky flags are extended, but never removed or shortened; cached files may be marked precious, but not vice versa. One caveat is when the target pool containing the existing copy is offline. In that case the existence of the copy cannot be verified. Rather than creating a new copy, the task fails and the file is put back into the transfer queue. This behaviour can be modified by marking a migration job as eager. Eager jobs create new copies if an existing copy cannot be immediately verified. As a rule of thumb, permanent jobs should never be marked eager. This is to avoid that a large number of unnecessary copies are created when several pools are restarted simultaneously.

A migration task aborts whenever it runs into a problem. The file will be reinserted at the end of the transfer queue. Consequently, once a migration job terminates, all files have been successfully transferred. If for some reason tasks for particular files keep failing, then the migration job will never terminate by itself as it retries indefinitely.

[return to top]

Command Summary

Login to the admin interface and cd to a pool to use the migration commands. Use the command help migration to view the possiblities.

(local) admin > cd <poolname>
(<poolname>) admin > help migration
migration cache [OPTIONS] TARGET...
migration cancel [-force] JOB
migration clear
migration concurrency ID CONCURRENCY
migration copy [OPTIONS] TARGET...
migration info JOB
migration ls
migration move [OPTIONS] TARGET...
migration resume JOB
migration suspend JOB
      

The commands migration copy, migration cache and migration move create new migration jobs. These commands are used to copy files to other pools. Unless filter options are specified, all files on the source pool are copied. The syntax for these commands is the same; example migration copy:

migration <copy> [<option>] <target>

There are four different types of options. The filter options, transfer options, target options and lifetime options. Please run the command help migration copy for a detailed description of the various options.

The commands migration copy, migration move and migration cache take the same options and only differ in default values.

migration move

The command migration move does the same as the command migration copy with the options:

  • -smode=delete (default for migration copy is same).
  • -pins=move (default for migration copy is keep).

additionally it uses the option -verify.

migration cache

The command migration cache does the same as the command migration copy with the option:

  • -tmode=cached

Jobs are assinged a job ID and are executed in the background. The status of a job may be queried through the migration info command. A list of all jobs can be obtained through migration ls. Jobs stay in the list even after they have terminated. Terminated jobs can be cleared from the list through the migration clear command.

Jobs can be suspended, resumed and cancelled through the migration suspend, migration resume and migration cancel commands. Existing tasks are allowed to finish before a job is suspended or cancelled.

Example:

A migration job can be suspended and resumed with the commands migration suspend and migration resume respectively.

(local) admin > cd <poolname>
(<poolname>) admin > migration copy -pnfsid=000060D40698B4BF4BE284666ED29CC826C7 pool2
[1] INITIALIZING migration copy 000060D40698B4BF4BE284666ED29CC826C7 pool2
[1] SLEEPING     migration copy 000060D40698B4BF4BE284666ED29CC826C7 pool2
(<poolname>) admin > migration ls
[1] RUNNING      migration copy 000060D40698B4BF4BE284666ED29CC826C7 pool2
(<poolname>) admin > migration suspend 1
[1] SUSPENDED    migration copy 000060D40698B4BF4BE284666ED29CC826C7 pool2
(<poolname>) admin > migration resume 1
[1] RUNNING      migration copy 000060D40698B4BF4BE284666ED29CC826C7 pool2
(<poolname>) admin > migration info 1
Command    : migration copy -pnfsid=000060D40698B4BF4BE284666ED29CC826C7 pool2
State      : RUNNING
Queued     : 0
Attempts   : 1
Targets    : pool2
Completed  : 0 files; 0 bytes; 0%
Total      : 5242880 bytes
Concurrency: 1
Running tasks:
[1] 00007C75C2E635CD472C8A75F5A90E4960D3: TASK.GettingLocations
(<poolname>) admin > migration info 1
Command    : migration copy -pnfsid=000060D40698B4BF4BE284666ED29CC826C7 pool2
State      : FINISHED
Queued     : 0
Attempts   : 1
Targets    : pool2
Completed  : 1 files; 5242880 bytes
Total      : 5242880 bytes
Concurrency: 1
Running tasks:
(<poolname>) admin > migration ls
[1] FINISHED     migration copy 000060D40698B4BF4BE284666ED29CC826C7 pool2
	

A migration job can be cancelled with the command migration cancel .

(local) admin > cd <poolname>
(<poolname>) admin > migration copy -pnfsid=0000D194FBD450A44D3EA606D0434D6D88CD pool2
[1] INITIALIZING migration copy 0000D194FBD450A44D3EA606D0434D6D88CD pool2
(<poolname>) admin > migration cancel 1
[1] CANCELLED    migration copy -pnfsid=0000D194FBD450A44D3EA606D0434D6D88CD pool2
	

And terminated jobs can be cleared with the command migration clear.

(<poolname>) admin > migration ls
[3] FINISHED     migration copy -pnfsid=0000D194FBD450A44D3EA606D0434D6D88CD pool2
[2] FINISHED     migration copy -pnfsid=00007C75C2E635CD472C8A75F5A90E4960D3 pool2
[1] FINISHED     migration copy -pnfsid=0000A48650142CBF4E55A7A26429DFEA27B6 pool2
[5] FINISHED     migration move -pnfsid=000028C0C288190C4CE7822B3DB2CA6395E2 pool2
[4] FINISHED     migration move -pnfsid=00007C75C2E635CD472C8A75F5A90E4960D3 pool2
(<poolname>) admin > migration clear
(<poolname>) admin > migration ls
	

Except for the number of concurrent tasks, transfer parameters of existing jobs cannot be changed. This is by design to ensure idempotency of jobs. The concurrency can be altered through the migration concurrency command.

(<poolname>) admin > migration concurrency 4 2
(<poolname>) admin > migration info
Command    : migration copy pool2
State      : FINISHED
Queued     : 0
Attempts   : 6
Targets    : pool2
Completed  : 6 files; 20976068 bytes
Total      : 20976068 bytes
Concurrency: 2
Running tasks:
      

[return to top]

Examples

[return to top]

Vacating a pool

Example:

To vacate the pool <sourcePool>, we first mark the pool read-only to avoid that more files are added to the pool, and then move all files to the pool <targetPool>. It is not strictly necessary to mark the pool read-only, however if not done there is no guarantee that the pool is empty when the migration job terminates. The job can be rerun to move remaining files.

(<sourcePool>) admin > pool disable -rdonly
(<sourcePool>) admin > migration move <targetPool>
[1] RUNNING      migration move <targetPool>
(<sourcePool>) admin > migration info 1
Command    : migration move <targetPool>
State      : RUNNING
Queued     : 0
Attempts   : 1
Targets    : <targetPool>
Completed  : 0 files; 0 bytes; 0%
Total      : 830424 bytes
Concurrency: 1
Running tasks:
[0] 0001000000000000000BFAE0: TASK.Copying -> [<targetPool>@local]
(<sourcePool>) admin > migration info 1
Command    : migration move <targetPool>
State      : FINISHED
Queued     : 0
Attempts   : 1
Targets    : <targetPool>
Completed  : 1 files; 830424 bytes
Total      : 830424 bytes
Concurrency: 1
Running tasks:
(<sourcePool>) admin > rep ls
(<sourcePool>) admin >

[return to top]

Caching recently accessed files

Example:

Say we want to cache all files belonging to the storage group atlas:default and accessed within the last month on a set of low-cost cache pools defined by the pool group cache_pools. We can achieve this through the following command.

(<sourcePool>) admin > migration cache -target=pgroup -accessed=0..2592000 -storage=atlas:default cache_pools
[1] INITIALIZING migration cache -target=pgroup -accessed=0..2592000 -storage=atlas:default cache_pools
(<sourcePool>) admin > migration info 1
Command    : migration cache -target=pgroup -accessed=0..2592000 -storage=atlas:default cache_pools
State      : RUNNING
Queued     : 2577
Attempts   : 2
Targets    : pool group cache_pools, 5 pools
Completed  : 1 files; 830424 bytes; 0%
Total      : 2143621320 bytes
Concurrency: 1
Running tasks:
[72] 00010000000000000000BE10: TASK.Copying -> [pool_2@local]

The files on the source pool will not be altered. Any file copied to one of the target pools will be marked cached.